Buffing of large flat parts made easier
Designed for polishing large parts, which are too difficult to polish manually, a buffing machine works typically stainless steel fabrications, sheet and plate, hollow sections and enclosures.
Surtech’s Model FAB buffing machine was designed for polishing large parts which are too difficult to polish manually, typically stainless steel fabrications, sheet and plate, hollow sections, enclosures, etc Model FAB buffing machine consists of a frame with guide rails, a table with horizontal and vertical travel and a buffing head which can be moved along the length of the machine. The machine is available in working lengths from 1500mm to 3000mm. In standard form parts up to approx.
600mm high can be accommodated.
Optional working lengths up to 6000mm and 1200mm height are available.
The buffing head with a single speed 2.2kW motor has clockwise and anti clockwise rotation and accepts buffs, brushes and wheels up to 250mm diameter and up to 150mm wide.
To improve polishing efficiency and to cover all recommended cutting speeds the buffing head is available with an inverter as optional extra.
There are also dedicated special versions of the FAB buffing machine which will polish tube longitudinally or which have swivelling buffing heads.
For grinding operations like weld seam removal, scale removal and surface graining and blending Surtech have developed a vertical abrasive belt head which can be fitted instead of the buffing head or together with the buffing head.
If both heads are fitted the working length reduces by approx.
500mm.
Model FAB buffing machine can be viewed and tested with your own parts at Surtech’s Abrasive Test Centre in Birmingham.
Comments
Leave a Reply